Lithium-ion costs to fall by up to 50% within five years

Lithium-ion costs to fall by up to 50% within five years

Courtesy of Energy Storage Update

Lithium-ion (Li-ion) technology will dominate the commercial market for energy storage in the US in the next three to five years as Li-ion system costs are expected to fall by 30% to 50%, according to Energy Storage Update’s Energy Storage Cost and Performance Report 2015 released on July 8.

Li-ion system costs currently range between $350 and $700/kWh ($1,000 and $2,000/kW) and costs should continue to fall on the back of growing supply from mega battery factories from the likes of Tesla, Alevo, Sharp, LG Chem and Panasonic, and promising growth in electric vehicle sales, the report says.

Technological innovation and economies of scale backed by big balance sheets are helping leading Li-technology battery manufacturers to widen their competitive advantage and lower costs. Li-ion battery system prices have already dropped 33% in the last five years, according to Energy Storage Update’s analysis of recent utility evaluations, and are expected to continue to fall.

Similarly, a recent report by Lux Research estimates that frontrunners such as Panasonic could drive down the price of Li-ion battery packs for electric vehicles by 35% to as low as $172/kWh in 2025. However, only the best-in-class players will achieve that cost threshold, while others will lag at $229/kWh.

Some of the benefits of Li-ion cost reduction could spill over to the stationary storage market, though they will not address added costs like land, construction and integration. According to Lux, installed stationary systems for residential and grid-scale use will hover around $655/kWh and $498/kWh in 2025, respectively.

Falling battery costs are good news for Li-ion systems because batteries are the single most expensive item in a storage system, accounting for about 60% of capital expenditure, followed by power conditioning system (PCS) costs with 20%, and balance of plant (BOP) and controls costs with 10% each, according to the Energy Storage Update report.

The ultra-conservative requirements of the electricity industry, with its emphasis on reliability and least cost, and dependence on highly-regulated market structures, could give Li-ion technologies an additional boost in the stationary market.

“Utilities and merchant storage developers are risk-averse. They prefer to mitigate early technology risk by purchasing highly engineered systems from deep-pocket suppliers and demanding tight warranties, which include strict performance clauses and liquidated damages,” said Jason Makansi, lead author of the Energy Storage Cost and Performance Report.

“Li-ion’s position appears solid as it is represented by a number of companies that are well regarded and have the financial muscle to make good on their warranties.”

Installed capacity
Though many storage technologies exist, the market-ready options for grid-scale storage technologies today are few and limited, according to the report.

Besides Li-ion, all other small-grid oriented technologies have currently slowed down in their commercial efforts, are pursuing niche market and functional opportunities or are expected to remain in the R&DD phase in the short-term.

Li-ion systems dominate among small-grid storage technologies with 60%, compared to 22% for flywheels, 12% for lead acid and 6% for NaS, according to US utility evaluations of 30 projects of up to 100 MW installed between 2010 and 2015 for which cost data is available (see Figure 1).


Figure 1: Distribution of small grid oriented storage technologies in recent utility evaluations. Source: Energy Storage Cost and Performance Report 2015.

Among bulk storage technologies, compressed air energy storage could make inroads and challenge the dominance of pumped-hydro storage (PHS), according to the report.

Conventional storage such as PHS will remain a key part of the system in the long run, but increasingly it “may have operational hours cannibalized by smaller-scale, Li-ion technologies that can be aggregated to provide a similar response to grid events,” said Nick Heyward, project director for Smarter Network Storage at UK Power Networks.

Non-pumped hydro energy storage installations were up 40% in the US in 2014, driven mainly by utility-scale deployments of lithium-ion batteries. In 2014, the US completed 180 individual installations with a weighted average system price of $2,064/KW, according to GTM Research.

Over 70% of the grid-scale storage deployments in 2014 were lithium ion. “Other” technologies were second with 27%, largely due to one 16 MW flywheel project installed in 2014. Vanadium flow batteries, lead-acid batteries and sodium chemistries each added 1% to the technology pie.

The significant share of Li-ion batteries in the current pipeline of installations suggests that Li-ion technologies will continue to compete effectively against other technologies in the short term, Heyward told Energy Storage Update.

“This provides increasing reassurance of integrator experience and repeatability of installations, which creates a virtuous cycle with customers – more megawatts on the ground provides a good reference base for further installations,” he said.

Can Li-ion hold ground?
According to Heyward, in the medium and long term, there are likely to be other technologies that gain a good foothold, but the flexibility and R&D investments that are going into the Li-ion sector are going to be hard to match, provided the latter meets performance expectations and avoids safety and fire incidents.

Currently, flywheels cost $2,100-2,600/kW while NaS battery systems cost roughly $3,500-$6,000/kW. The limited number of commercial suppliers means capital costs are still high compared to Li-ion technologies (see table below).


Figure 2: Costs of storage options. Source: Energy Storage Cost and Performance Report 2015.

There are promising developments with other battery technologies, though they are still to be tested in the open market. Earlier this year, SunEdison announced it would purchase up to 1,000 flow batteries from Imergy Power Systems for rural electrification systems in India.

Imergy says its third-generation vanadium-flow battery aims to compete with lithium and lead-acid batteries at the grid scale on a cost basis, but finding markets will be a challenge.

The market demand for grid-scale storage in the US is growing, especially for storage systems in the 10 MW-100 MW range, where Li-ion has proven to be the most versatile generic battery option.

At least one merchant storage company, AES, is also offering battery systems in the 100 MW-200 MW range and is constructing a 100 MW Li-ion system for electric utility Southern California Edison.

Particularly at the small end of the capacity application range (1 MW-50 MW), the economic evaluation will likely be among lithium-ion suppliers and how a lithium-ion grid-scale system compares with traditional options for providing the same identified grid functions/services, the report says.

Normal upgrades on the grid and conventional fossil fuel solutions at existing power plants are in many cases cheaper than investing in new energy storage systems.

“Owner/operators will evaluate these storage options against other, more conventional ways of accomplishing the same thing,” Makansi said. “There are examples of utilities pushing the limits of, and modifying, conventional assets all over the country with the intention of achieving more flexibility and faster response typical of storage.”

“A utility in the Midwest, for example, is deeply cycling their existing fossil units to accommodate wind energy, and they will probably do that until they can’t possibly do it any more before they spend more capital dollars for a storage system.”

Traditional energy storage techniques that compete with grid-scale storage range from $25-$50 per kW for putting a synchronous condenser on a conventional power plant to $1,000-$1,500 per kW for reciprocating engine/gen sets. Other solutions exist, though every competitive option is limited in its ability to solve specific grid issues (see Figure 3 below).


Figure 3: Options that compete with storage. Source: Energy Storage Cost and Performance Report 2015.

For detailed lifecycle cost analysis of Li-ion and CAES systems and insight into the expected evolution of storage costs, check out the Energy Storage Cost and Performance Report 2015.

By Nadya Ivanova

Comments are closed