The Importance of Right Lighting

The Importance of Right Lighting

In the last couple of years “everybody” has learned about the great cost savings to be achieved by switching to LED lights, direct cost savings of over 50% with additional savings due to reducing load on AC and reducing O&M. LEDs can be used in so many situations, can be dimmed, and now fit in virtually every type of fixture or ballast.

Thus the temptation is just to go to the store and pick up a bunch of LEDs and begin to substitute. Sure you’ll save some cost. But that’s a big mistake and you can actually harm the productivity of your workers, the ability to do business by your tenants, and the sellability of product by the retailers in your buildings.

In fact, even if you are not changing to LEDs, it is important to review your building’s lighting, as the very way we work has changed, as we have gone from reading and writing on paper exclusively to the common use of computers and other screens. Screens supply some light. Thus overhead lighting needs (number of lumens) of office workers to function well have dropped somewhat. Over-lighting is a potential issue, which increases costs, and may adversely affect worker health, mood, and productivity.

OverheadLights

In the “old” days of exclusive working with paper, the recommended lighting levels were as high as 1,000 luxs (1 lux = 1 lumen/sq. meter). However, the US General Services Administration now recommends levels such as 500 lux for open offices, 300 lux for conference rooms, and less in other areas.

Therefore, it is useful before and after changing a building’s lighting to perform a lighting study. Have light readings taken to determine whether you are over-lighting an area. It may be tempting to say after an LED upgrade “I don’t care if I over-light my areas. My electricity costs are now so low, I don’t mind over-lighting.” This is a mistake as over-lighting stresses employees, causes headaches and anxiety, and may interfere with sleep and circadian rhythms. In other words, it may affect productivity, which could cost your company more money than is saved by switching to LEDs.

If you find areas of over-lighting, do some de-lamping: remove some lamps to bring the light levels down to the recommended intensities. Not only will you improve the productivity of your workers and tenants, but you will save additional energy costs and O&M having fewer lights using electricity. But make sure you don’t overdo de-lamping.

Finally, take into consideration the time of day. During different times of day, sunlight may enter certain workspaces. During those times, allow the sunlight in. Workers work better under natural light. Either procure/use daylighting sensors to adjust the artificial light to the sunlight entering from outside or turn down or off certain banks of lights when the sun shines in. Again, make the effort not to over-light areas.

EE Reports has the expertise to conduct lighting studies for you and to make determinations of what types and intensities of lights should be brought in to meet standards for different uses and security. We can recommend the right daylight sensors for different parts of your building and where to re-locate lighting to get not the most, but the best lighting for your tenants and workers, based on their job needs. Contact Marc Karell, VP Engineerng,  today at 914-584-6720 or marc@eereports.com